t

Current H–index = 6 (Scopus) 

 

JOURNALS  |  CONFERENCES  |  EDITORIAL & OTHERS

In Press / Accepted for Publication
  1. Azlan, K.A., Tamaldin, N., & Abdollah, M.F.B. (2018). Effects of biodiesel towards ci engine performance and emission: A brief review, Journal of Advanced Manufacturing Technology, Accepted for publication (Scopus).

  2. Mohmad, M., Abdollah, M.F.B., Tamaldin, N., & Amiruddin, H. (2018). Frictional characteristics of laser surface textured activated carbon composite derived from palm kernel, The International Journal of Advanced Manufacturing Technology, In Press. DOI: https://doi.org/10.1007/s00170-017-1436-1 (ISI).

  3. Mat Tahir, N.A., Abdollah, M.F.B, Tamaldin, N., Amiruddin, H., & Mohamad Zin, M.R.B. (2018). A brief review on the wear mechanisms and interfaces of carbon based materials, Composite Interfaces, In Press. DOI: https://doi.org/10.1080/09276440.2018.1380472 (ISI).

2017
  1. Mahmud, D.N.F., Abdollah, M.F.B., Masripan, N.A.B., Tamaldin, N., & Amiruddin, H. (2017). Frictional wear stability mechanisms of an activated carbon composite derived from palm kernel by phase transformation study, Industrial Lubrication and Tribology, 69(6), 945-951.  DOI: https://doi.org/10.1108/ILT-04-2017-0116 (ISI).

  2. Shuhimi, F.F., Abdollah, M.F.B., Kalam, M.A., MAsjuki, H.H., Mustafa, A., Mat Kamal, S.E., & Amiruddin, H. (2017), Effect of operating parameters and chemical treatment on the tribological performance of natural fibre composites: A review, Particulate Science and Technology, 35(5), 512-524. DOI: http://dx.doi.org/10.1080/02726351.2015.1119226 (ISI).

  3. Mohmad, M., Abdollah, M.F.B., Tamaldin, N., & Amiruddin, H. (2017). The effect of dimple size on the tribological performances of a laser surface textured palm kernel activated carbon-epoxy composite. Industrial Lubrication and Tribology, 69(5), 768-777. DOI: https://doi.org/10.1108/ILT-05-2016-0121 (ISI).

  4. Mat Tahir, N.A., Abdollah, M.F.B., Hasan, R., Amiruddin, H., & Abdullah, M.I.H.C. (2017). Statistical models for predicting wear and friction coefficient of palm kernel activated carbon-epoxy composite using the ANOVA. Industrial Lubrication and Tribology, 69(5), 761-767. DOI: https://doi.org/10.1108/ILT-02-2016-0031 (ISI).

  5. Rosley, M.N., Tamaldin, N., Abdollah, M.F.B., Zakaria, M.Z., & Yamin, M.K.A. (2017). Emission characteristics of hydrogen enrichment in light duty single cylinder diesel engine. ARPN Journal of Engineering and Applied Sciences, 12(14), 4255-4258. (Scopus).

  6. Lee, S.C., Tamaldin, N., & Abdollah, M.F.B. (2017). Tribological performance of low blend decanter cake biodiesel. Industrial Lubrication and Tribology, 69(3), 425-432. DOI: http://dx.doi.org/10.1108/ILT-08-2016-0180 (ISI).

  7. Mustafa, A., Abdollah, M.F.B., Amiruddin, H., Shuhimi, F.F., & Muhammad, N. (2017). Optimization of friction properties of kenaf polymer composite as an alternative friction material. Industrial Lubrication and Tribology, 69(2), 259-266. DOI: http://dx.doi.org/10.1108/ILT-05-2016-0118 (ISI).

  8. Abdullah, M.I.H.C., Abdollah, M.F.B., Amiruddin, H., Mat Nuri, N.R, & Saleman, A.R. (2017). The hBN nanoparticles as an effective engine oil additive to enhance the durability and performance of a small diesel engine. Journal of Mechanical Engineering, SI1(1), 103-112 (Scopus). [Link]

  9. Amiruddin, H., Mahmood, W.M.F.W., Abdullah, S., Mansor, M.R.A., Abdollah, M.F.B., Mamat, R., & Alias, A. (2017). Effect of vaned diffuser on the performance of small turbocharger, Journal of Mechanical Engineering, SI1(1), 227-236. (Scopus). [Link]

  10. Abdullah, M.I.H.C., Abdollah, M.F.B., Amiruddin, H., Tamaldin, N., & Mat Nuri, N.R. (2017). Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface Science and Engineering, 11(1), 12-22. DOI: http://dx.doi.org/10.1504/IJSURFSE.2017.10003784 (ISI).

2016
  1. H.A. Hamid, N.A.B. Masripan, M.F.B. Abdollah, R. Hasan, Characterization of raw and ripen of banana peel wastes and it’s oils extraction using Soxhlet method, International Journal of Applied Chemistry, 12:1 (2016), pp. 1-5. (Scopus). [Link]

  2. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil, Industrial Lubrication and Tribology, 68:4 (2016), pp. 441-445. DOI: http://dx.doi.org/10.1108/ILT-10-2015-0157 (ISI).

  3. F.F. Shuhimi, M.F.B. Abdollah, M.A. Kalam, H.H. Masjuki, A. Mustafa, H. Amiruddin, Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions, Tribology International, 101 (2016), pp. 247-254. DOI: http://dx.doi.org/10.1016/j.triboint.2016.04.020 (ISI).

  4. N.A. Mat Tahir, M.F.B. Abdollah, R. Hasan, H. Amiruddin, The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon-epoxy composite, Tribology International, 94 (2016), pp. 352-359. DOI: http://dx.doi.org/10.1016/j.triboint.2015.10.001 (ISI).

  5. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, The Potential of hBN Nanoparticles as Friction Modifier and Antiwear Additive in Engine Oil, Mechanics & Industry, 17:1 (2016), pp. 104. DOI: http://dx.doi.org/10.1051/meca/2015037 (ISI).

  6. A.Z.I. Abdullah, M.F.B. Abdollah, B.T. Tee, H. Amiruddin, A.K. Mat Yamin, N. Tamaldin, Thermal Conductivity and Latent Heat Properties of µPCM/MWCNT Composites for EVs Application, Advanced Materials Research, 1133 (2016), pp. 131-135. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.1133.131 (Scopus).

  7. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Effect of Diluted Nano-Oil on the Anti-wear and Friction Properties, Advanced Materials Research, 1133 (2016), pp. 452-456. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.1133.452 (Scopus).

  8. M.Z. Mohd Razi, M.F.B. Abdollah, N.R Mat Nuri, H. Amiruddin, N. Tamaldin, Friction Properties of Waste Cooking Oil with Banana Peel Broth, Advanced Materials Research, 1133 (2016), pp. 579-582. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.1133.579 (Scopus).

2015
  1. N.A. Mat Tahir, M.F.B. Abdollah, R. Hasan, H. Amiruddin, The effect of temperature on the tribological properties of palm kernel activated carbon-epoxy composite, Tribology Online, 10:6 (2015), pp. 428-433. DOI: http://doi.org/10.2474/trol.10.428 (Scopus).

  2. A.Z.I. Abdullah, M.F.B. Abdollah, H. Aminuddin, A.K. Mat Yamin, N. Tamaldin, Thermal performance of µPCM/MWCNT composites at different ambient temperatures, Jurnal Teknologi (Science and Engineering), 77:21 (2015), pp. 103-108. DOI: http://dx.doi.org/10.11113/jt.v77.6615. (Scopus).

  3. A.H. Hamid, N.A.B. Masripan, J. Basiron, M.M.B. Mustafa, R. Hasan, M.F.B. Abdollah, R. Ismail , Effect of banana peels as an additive on the tribological properties of paraffin oil, Jurnal Teknologi (Science and Engineering), 77:21 (2015), pp. 73-77. DOI: http://dx.doi.org/10.11113/jt.v77.6610. (Scopus).

  4. K.W. Chua, M.F.B. Abdollah, N.A. Mat Tahir, H. Amiruddin, Frictional properties of palm kernel activated carbon-epoxy composite under various normal loads, Jurnal Teknologi (Sciences and Engineering), 76:10 (2015), pp. 1-4. DOI: http://dx.doi.org/10.11113/jt.v76.5783. (Scopus).

  5. M.Z. Zakaria, M.N.A. Saadun, N. Idris, N.F. Haminudin, M.F. Abdollah, E.Z. Ahmad, Effect of pH towards hydrogen gas output of a small and portable alkaline electrolyser, Jurnal Teknologi (Sciences and Engineering), 76:5 (2015), pp. 49-52. DOI: http://dx.doi.org/10.11113/jt.v76.5535 (Scopus).

  6. M.H.M, Hafidzal, M.Z.M. Razi, A. Hamzah, N.H. Razak, N.I. Zulkafli, M.F.B. Abdollah, S.A. Shamsudin, A. Roslizar, Potential of mixed Zingiber officinale and Garcinia atroviridis as a treating medium for used cooking oil, ARPN Journal of Engineering and Applied Sciences, 10:17 (2015), pp. 7784 – 7787. (Scopus).

  7. H. Yusof, N. Tamaldin, M.F.B. Abdollah, A. Khalid, Evaluation of the storage effect on the fuel properties for variety biodiesel blends, ARPN Journal of Engineering and Applied Sciences, 10:17 (2015), pp. 7707 - 7711. (Scopus).

  8. K.A.H. Al Mahmud, M.A. Kalam, H.H. Masjuki, M.F.B. Abdollah, Tribological study of a tetrahedral Diamond-like-Carbon coating under vegetable oil-based lubricated condition, Tribology Transactions, 58:5 (2015), pp. 907-913. DOI: http://dx.doi.org/10.1080/10402004.2015.1025933 (ISI).

  9. Mohammad Nazry Bin Rosley, N. Tamaldin, M.F.B Abdollah, Z.M. Zulfattah, The Effects of Voltage Flow and pH Value in Alkaline Electrolyser System to Performance, Applied Mechanics and Materials, 773-774 (2015), pp. 440-444. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.773-774.440 (Scopus).

  10. Y. Humairak, N. Tamaldin, M.F.B. Abdollah, M.F. Ali, A. Khalid, The Storage Effect on the Fuel Properties and Emission for Variety Biodiesel Blends, Applied Mechanics and Materials, 773-774 (2015), pp. 455-459. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.773-774.455 (Scopus).

  11. N. Mohamad, A.A. Latiff, M.A. Drahman, S.R. Shamsuri, J.A. Razak, I.S. Othman, K. Juffrizal, M.F.B. Abdollah, H.E.A. Maulod, Tensile Behavior of Thermoplastic Reinforced out of Condition Aerospace Grade Carbon Fiber Prepreg Waste via Melt Compounding Process, Applied Mechanics and Materials, 761 (2015). pp. 526-530. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.761.526  (Scopus).

  12. K. Juffrizal, M.Y. Nidzamuddin, C.F. Tan, M.F.B. Abdollah, Z.M. Zulfattah, N. Mohamad, N. M. Maslan, The Implementation of Product Architecture in Developing Conceptual Design for Passive Grease Trap, Applied Mechanics and Materials, 761 (2015). pp. 636-640. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.761.636 (Scopus).

  13. A. Mustafa, M.F.B. Abdollah, N. Ismail, H. Amiruddin, N. Umehara, Selection and Verification of Kenaf Fibres as an Alternative Friction Material Using Weighted Decision Matrix Method, Materials & Design, 67 (2015), pp. 577-582. DOI: http://dx.doi.org/10.1016/j.matdes.2014.10.091 (ISI).

2014
  1. N. Mohamad, N.S. Zainol, F.F. Rahim, M.K.M. Salleh, M.A. Azam, M.Y. Yaakub, M.E.A. Manaf, H.E.A. Maulod, M.F.B. Abdollah, Interaction of Mixing Factors with Mechanical Properties of PP/ENR Blend via Response Surface Methodology, Journal of Mechanical Engineering, 11:1 (2014), pp. 1-13. (Scopus). [Link]

  2. K.W. Chua, M.F.B. Abdollah, N.A. Mat Tahir, H. Amiruddin, Potential of Palm Kernel Activated Carbon Epoxy (PKAC-E) Composite as Solid Lubricant: Effect of Load on Friction and Wear Properties, Jurnal Tribologi, 2 (2014), pp. 31-38. (Google Scholar). [Link]

  3. A. Mustafa, M.F.B. Abdollah, N. Ismail, H. Amiruddin, N. Umehara, Materials Selection for Eco-Aware Lightweight Friction Material, Mechanics & Industry, 15:4 (2014), pp. 279-285. DOI: http://dx.doi.org/10.1051/meca/2014039. (ISI).

  4. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N.R. Mat Nuri, N. Tamaldin, M. Hassan, S.A. Rafeq, Effect of hBN/Al2O3 Nanoparticles on Engine Oil Properties, Energy Education Science and Technology Part A, 32:5 (2014), pp. 3261-3268. (Scopus). [Link]

  5. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, M. Hassan, S.A. Rafeq, Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles, Applied Mechanics and Materials, 607 (2014), pp. 70-73. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMM.607.70. (Scopus).

  6. M.F.B. Abdollah, M.A.A. Mazlan, H. Amiruddin, N. Tamaldin, Experimental Study on Friction and Wear Behaviors of Bearing Material under Gas Lubricated Conditions, Jurnal Teknologi (Sciences and Engineering), 66:3 (2014), pp. 43-49. DOI: http://dx.doi.org/10.11113/jt.v66.2693. (Scopus).

  7. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil, Jurnal Teknologi (Sciences and Engineering), 66:3 (2014), pp. 1-6. DOI: http://dx.doi.org/10.11113/jt.v66.2685. (Scopus).

2013
  1. M.F.B. Abdollah, M.A.A. Mazlan, H. Amiruddin, N. Tamaldin, Friction Behaviour of Bearing Material under Gas Lubricated Conditions, Procedia Engineering, 68 (2013), pp. 688-693. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.240. (Scopus).

  2. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Optimization of Tribological Performance of HbN/Al2O3 Nanoparticles as Engine Oil Additives, Procedia Engineering, 68 (2013), pp. 313-319. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.185. (Scopus).

  3. Z.H. Nazri, M.Z.M. Rody, M.F.B. Abdollah, S.A. Rafeq, H. Amiruddin, N.Tamaldin, N.A.B Masripan, Elastohydrodynamics Lubrication For Bio-Based Lubricants in Elliptical Conjunction, Procedia Engineering, 68 (2013), pp. 123-129. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.157. (Scopus).

  4. N. Tamaldin, A.K. Mat Yamin, M.F.B. Abdollah, H. Amiruddin, M.A. Abdullah, Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES, Procedia Engineering, 68 (2013), pp. 305-312. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.184. (Scopus).

  5. M.H.M. Hanafi, W.M.F. Wan Mahmood, M.F.B. Abdollah, S.A. Rafeq, N.F.M. Nor, Z. M. Zulfattah, S.A. Shamsudin, A. Ibrahim, Comparison of Soot Particle Movement Based on Crank Angle, Procedia Engineering, 68 (2013), pp. 245-250. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.175. (Scopus).

  6. N. Mohamad, N.S. Zainol, F.F. Rahim, Hairul Effendy Ab Maulod, Toibah Abd Rahim, Siti Rahmah Shamsuri, M.A. Azam, M.Y. Yaakub, M.F.B. Abdollah, Mohd Edeerozey Abd Manaf, Mechanical and Morphological Properties of Polypropylene/Epoxidized Natural Rubber Blends at Various Mixing Ratio, Procedia Engineering, 68 (2013), pp. 439-445. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.204. (Scopus).

  7. S.A. Rafeq, Z.M. Zulfattah, A.M. Najib, M.Z.M. Rody, S. Fadhli, M.F.B. Abdollah, M.H.M. Hafidzal, Preliminary Study of CST in Malaysia Based on Field Optical Efficiency, Procedia Engineering, 68 (2013), pp. 238-244. DOI: http://dx.doi.org/10.1016/j.proeng.2013.12.174. (Scopus).

  8. M.F.B. Abdollah, R. Hasan, Preliminary design of side door impact beam for passenger cars using aluminium alloy, Journal of Mechanical Engineering and Technology, 5:1 (2013), pp. 11-18. (MyCite)

2012
  1. M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Miyamoto, T. Tokoroyama, N. Umehara, Future Developments of a Deformation-Wear Transition Map of DLC Coating, Tribology Online, 7:3 (2012), pp. 107-111. DOI: http://dx.doi.org/10.2474/trol.7.107. (Scopus).

  2. M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Miyamoto, T. Tokoroyama, N. Umehara, Deformation-Wear Transition Map of DLC Coating Under Cyclic Impact Loading, Wear, 274-275 (2012), pp. 435-441. DOI: http://dx.doi.org/10.1016/j.wear.2011.11.007. (ISI).

2011
  1. M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, T. Tokoroyama and N. Umehara, The Effect of Maximum Normal Impact Load, Absorbed Energy, and Contact Impulse, on the Impact Crater Volume/Depth o DLC Coating, Tribology online, 6:6 (2011), pp. 257–264. DOI: http://dx.doi.org/10.2474/trol.6.257. (Scopus).

2010
  1. M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Umehara and T. Tokoroyama, Phase Transformation Studies on the a-C Coating under Repetitive Impacts, Surface and Coatings Technology, 205 (2010), pp. 625-631. DOI: http://dx.doi.org/10.1016/j.surfcoat.2010.07.062. (ISI).


2017
  1. M.F.B. Abdollah, Agricultural-waste based polymeric composite as a new self-lubricating antifriction material. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017 – Keynote Speaker. [Link].

  2. D.N.F. Mahmud, M.F.B. Abdollah, N.A.B. Masripan, H. Amiruddin, T. Tokoroyama, N. Umehara, Synergistic effect of contact pressure and sliding speed on the friction coefficient of palm kernel activated carbon-epoxy composite. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017. [Link].

  3. M. Mohmad, M.F.B. Abdollah, N. Tamaldin, H. Amiruddin, T. Tokoroyama, N. Umehara, Frictional properties of laser surface textured palm kernel activated carbon reinforced polymeric composite. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017. [Link].

  4. M.A.M. Alias, M.F.B. Abdollah, T. Tokoroyama, N. Umehara, Effect of zinc dioctyl dithophospate concentrations on the friction coefficient of palm oil. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017. [Link].

  5. N.A.M. Tahir, M.F.B. Abdollah, N. Tamaldin, H. Amiruddin, T. Tokoroyama, N. Umehara, Potential of growing graphene from solid waste products. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017. [Link].

  6. N.S.R. Apandi, M.F.B. Abdollah, R. Ismail, T. Tokoroyama, N. Umehara, Effect of hexagonal boron nitride additive on the vibrations of ball bearing. Proceedings of SAKURA Symposium Mechanical Science and Engineering 2017, Nagoya, 12 September 2017. [Link].

  7. M.F.B. Abdollah, H. Amiruddin, N.S.F. Abdul Rashid, Tribological characteristics of bio-lubricant enhanced with eco-additives as potential automotive lubricant, Proceedings of 3rd International Conference on Sustainable Automotive Engineering, Hong Kong, 01-03 July 2017.

  8. H.A. Hamid, N.A.B. Masripan, R. Hasan, G. Omar, M.F.B. Abdollah, Tribological behavioural of bio-oil extracted from peel waste of musa aluminata balbisiana, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  9. N.M.B.M. Sukery, M.I.H.C. Abdullah, A. Ahmad, M.F.B. Abdollah, N.R.M. Nuri, Effect of virgin coconut oil, VCO as transmission lube oil based substitute on the friction properties, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  10. A.A.E.M. Nawi, M.I.H.C. Abdullah, M.F.B. Abdollah, N.R.M. Nuri, M.A. Samsudin, Investigation on hBN nanoparticle dispersion stability in liquid phase with difference dispersion agents, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  11. A.R. Zulhilmi, N.A.B. Masripan, S.O.A.N. Hayder, M.F.B. Abdollah, G. Omar, M.I. Syakir, A.H. Nurfaizey, S.H.S.M. Fadzullah, Effect of temperature on friction of bio-lubricant under high loading capacity, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  12. N. Tamaldin, S.R. Ruslan, A.K. Mat Yamin, A. Md Saad, M.F.B. Abdollah, Development of 3-cylinder composite engine: Analysis on strength and fuel efficiency, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  13. N. Tamaldin, H.I.M. Yusof, M.F.B. Abdollah, G. Omar, M.I.F. Rosley, Design self-balancing bicycle, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  14. N.S.R. Apandi, R. Ismail, M.F.B. Abdollah, Numerical studies on vibration characteristics on ball bearing operated under hexagonal boron nitride (hBN) nanoparticles, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  15. N.S.R. Apandi, R. Ismail, M.F.B. Abdollah, Vibration analysis of ball bearing using Finite Element Analysis, Proceedings of Mechanical Engineering Research Day 2017, Melaka, 30 March 2017. [Link].

  16. M.F.B. Abdollah, D.N.F. Mahmud, N.A.B. Masripan, H. Amiruddin, N. Tamaldin, On the relation between phase transformation and frictional stability of palm kernel activated carbon composite during dry sliding under different loads, Proceedings of the 2nd African Congress in Tribology, Marrakesh, 16-19 April 2017.

  17. N. Tamaldin, M. Mohmad, M.F.B. Abdollah, H. Amiruddin, Effect of sliding speed on the laser surface texturing of palm kernel activated carbon composite under lubricated condition, Proceedings of the 2nd African Congress in Tribology, Marrakesh, 16-19 April 2017.

  18. M.F.B. Abdollah, F.F. Shuhimi, M.A. Kalam, M. Hassan, H. Amiruddin, Wear failure analysis of oil palm fiber-epoxy composite, Proceedings of ITS-IFToMM/K-TIS2017, Jeju, 19-22 March 2017.

2016
  1. M. Mohmad, M.F.B. Abdollah, N. Tamaldin, H. Amiruddin, A.G. Jaharah, Tribological characteristics of surface textured PKAC-E created by laser surface texturing under boundary lubrication, Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), Putrajaya, 28-30 August 2016. [Link].

  2. D.N.F. Mahmud, M.F.B. Abdollah, N.A.B. Masripan, F.F. Shuhimi, H. Amiruddin, N. Tamaldin, Bearing load capacity of a palm kernel activated carbon -epoxy composite, Proceedings of 4th Malaysia-Japan Tribology Symposium 2016, Kuala Lumpur, 25-26 August 2016. [Link].

  3. N.S.R. Apandi, R. Ismail, M.F.B. Abdollah, R. Ramlan, Vibration characteristics on ball bearing operated with hexagonal boron nitride (hBN) nanoparticle mixed with diesel engine oil, Proceedings of 4th Malaysia-Japan Tribology Symposium 2016, Kuala Lumpur, 25-26 August 2016. [Link].

  4. S.C. Lee, N. Tamaldin, M.F.B. Abdollah, Tribological properties of biodiesel produced from waste feedstocks, Proceedings of ICETA2016, Taipei, 20-22 April 2016.

  5. N.A. Mat Tahir, M.F.B. Abdollah, R. Hasan, M.I.H.C. Abdullah, H. Amiruddin, N. Tamaldin, A statistical model for predicting the tribological properties of palm kernel activated carbon-epoxy composite, Proceedings of ICETA2016, Taipei, 20-22 April 2016.

  6. H.A. Hamid, N.A.B. Masripan, M.F.B. Abdollah, R. Hasan, G. Omar, The effect of temperatures and extraction time on bio oil extracted from banana peel wastes, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  7. A. Mustafa, M.F.B. Abdollah, H. Amiruddin, F.F. Shuhimi, N.A.M. Tahir, N. Muhammad, S.E. Mat Kamal, N. Ismail, Optimization of friction coefficient of kenaf/epoxy composites as an alternative friction material using Taguchi method, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  8. N. Tamaldin, A.S. Mohamad, Y. Humairak , M.H.M. Husin, M.F.B. Abdollah, Experimental Investigation of engine performance and emission for biodiesel at various storage conditions, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  9. N. Tamaldin, F. Harun, Y. Humairak, M.H.M. Husin, M.F.B. Abdollah, Effect of storage duration on the fuel properties of different biodiesel blends, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  10. M.M. Zamberi, I.A.K.M. Safari, N.H. Razak, F.N. Ani, M.F.B. Abdollah, Application of limestone as based catalyst in transesterification of rubber seed oil in biodiesel production, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  11. F.F. Shuhimi, M.F.B. Abdollah, M.A. Kalam, H.H. Masjuki, A. Mustafa, H. Amiruddin, Surface durability of oil palm fiber/epoxy composite at various temperatures, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  12.  J. Basiron, N.A.B. Masripan, M.F.B. Abdollah, A.H. Husna, Effect of load on friction and wear of banana peel as an additive, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

  13. K.F. Yong, B.T. Tee, M.F.B. Abdollah, I.S. Mohamad, C.T. Chong, Friction and wear characteristic of different natural oil-based lubricants with carbon nanotubes as additive, Proceedings of Mechanical Engineering Research Day 2016, Melaka, 31 March 2016. [Link].

2015
  1. N. Tamaldin, M.F.B. Abdollah, H. Amiruddin, M.A. Abdullah, M.T. Taib, Tribological impact of CI engine piston rings under different blend ratio biodiesel, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  2. N. Mohamad, M. Mazliah, Z. Nur Sharafina, M.N. Amirul Asyraf, M.F.B. Abdollah, A.M. Hairul Effendy, Compressive properties and water contact behavior of opened-cell green rubber foam at different blowing agent concentration, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  3. N. Tamaldin, M.F.B. Abdollah, H. Amiruddin, A.K. Mat Yamin, H.H. Masjuki, Z.M. Zulfattah, Review of biodiesel standard development in Malaysia, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  4. M.I.H.C. Abdullah, M.F.B. Abdollah, N.R. Mat Nuri, H. Amiruddin, N. Tamaldin, Comparison of the frictional properties of nano-oil and SAE 15W40 oil diluted with biodiesel fuel, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  5. M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Evaluations of piston ring wear using nano hexagonal boron nitride lubricant additives in small diesel engine, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  6. A.A. Latiff, N.Mohamad, A.R. Jeefferie, M.H.M. Nasir, S. Siti Rahmah, M.A. Mahamood, M.I.H.C. Abdullah, M.F.B. Abdollah, Friction and wear characteristics of recycled aerocomposite carbon fibre reinforced polypropylene composites, Proceedings of Malaysian International Tribology Conference 2015, Penang, 16-17 November 2015. [Link]

  7. K.A. Mohd Kassim, M.F.B. Abdollah, N.A.B Masripan, H. Amiruddin, N. Tamaldin, Banana peel as a potential additive in lubricant, Proceedings of TURKEYTRIB2015, Istanbul, 7-9 October 2015.

  8. M.I.H.C Abdullah, N. Tamaldin, M.F.B. Abdollah, H. Amiruddin, N.R. Mat NurI, The effect of hbn nanoparticles on the extreme pressure lubrication, Proceedings of TURKEYTRIB2015, Istanbul, 7-9 October 2015.

  9. M.F.B. Abdollah, A. Mustafa, F.F. Shuhimi, S.E. Mat Kamal, N. Ismail, H. Amiruddin, Potential of kenaf fibers as an alternative friction material using systematic design approach, Proceedings of International Tribology Conference 2015, Tokyo, 16-20 September 2015.

  10. Z.M. Zulfattah, A.S. Zahari, I. Norain, R.M. Dan, B.T. Tee, U. Al Amani, M.F.B. Abdollah, Scratching methods for a portable alkaline electrolyser plate, Proceedings of International Tribology Conference 2015, Tokyo, 16-20 September 2015.

  11. N.A. Abas, N. Tamaldin, A.K. Mat Yamin, M.F.B. Abdollah, Cylinder deactivation impact on engine performance and emission for SI engine, Proceedings of International Conference on Design and Concurrent Engineering 2015, Tokushima, 6-7 September 2015.

  12. H. Amiruddin, M.F.B. Abdollah, A.M. Idris, M.I.H.C. Abdullah, N. Tamaldin, Stability of nano-oil by pH control in stationary conditions, Proceedings of Mechanical Engineering Research Day 2015, Melaka, 31 March 2015. [Link]

  13. A.Z.I. Abdullah, M.F.B. Abdollah, B.T. Tee, H. Amiruddin, A.K. Mat Yamin, N. Tamaldin, Thermal performance of carbon-based microencapsulated phase change materials, Proceedings of Mechanical Engineering Research Day 2015, Melaka, 31 March 2015. [Link]

  14. M.M.B. Mustafa, N.A.B. Masripan, M.F.B. Abdollah, J. Basiron, Preliminary study on tribological properties of banana peel broth as additive in paraffin oil, Proceedings of Mechanical Engineering Research Day 2015, Melaka, 31 March 2015. [Link]

2014
  1. N.A. Mat Tahir, M.F.B. Abdollah, R. Hasan, H. Amiruddin, The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures,  Proceedings of 3rd Malaysia-Japan Tribology Symposium 2014, Kuala Lumpur, 12~14 November 2014.

  2. M.F.B. Abdollah, M.I.H.C. Abdullah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine, Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, Leeds, United Kingdom, 2~5 September 2014.

  3. H. Amiruddin, M.F.B. Abdollah, M.A.A. Mazlan, N. Tamaldin, Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials, Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, Leeds, United Kingdom, 2~5 September 2014.

  4. M.F.B. Abdollah, M.I.H.C. Abdullah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Drive to Greener Future: Tribological and Engine Performances of Nano-oil, Proceedings of JAST Tribology Conference 2014 (International Forum on Front-line of Tribology in Asian Region), Tokyo, 19~21 May 2014. - Invited Speaker.

  5. A. Mustafa, M.F.B. Abdollah, N. Ismail, H. Amiruddin, Pre-Materials Selection for Eco-Aware Lightweight Friction Material, Proceedings of 9th International Materials Technology Conference and Exhibition (IMTCE2014), Kuala Lumpur, 13~16 May 2014.

2013
2012
2011
2010
2009 and below

  1. M.F.B. Abdollah, Special issue on 50 years of Tribology - sustainable manufacturing, Industrial Lubrication and Tribology, 69:3 (2017), pp. 333. DOI: http://dx.doi.org/10.1108/ILT-02-2017-0026. (ISI).

  2. M.F.B. Abdollah, Editorial, International Journal of Materials and Product Technology, 53:3-4 (2016), pp. 203. [Link] (ISI).

  3. M.F.B. Abdollah, Guest Editorial, Transactions of the IMF, 94:4 (2016), pp. 171.  DOI: http://dx.doi.org/10.1080/00202967.2016.1179475. (ISI).

  4. M.F.B. Abdollah, Introduction, Journal of Materials Research, 31:13 (2016), pp. 1813-1813. DOI: http://dx.doi.org/10.1557/jmr.2016.253. (ISI).

  5. M.F.B. Abdollah, MITC2015: Tribology for Sustainable Development, Tribology - Materials, Surfaces & Interfaces, 10:2 (2016), pp. 63. DOI: http://dx.doi.org/10.1080/17515831.2016.1169584. (Scopus).

  6.  M.F.B. Abdollah, Preface – MITC2015 Special Issue, Composite Interfaces, 23:6 (2016), pp. 467-468. DOI: http://dx.doi.org/10.1080/09276440.2016.1166412. (ISI).

  7. M.F.B. Abdollah, H. Amiruddin. When should I change my tire? in CARe Newsletter, Issue 3, 2016, pp. 5. [Link]

  8. M.F.B. Abdollah, S. Kasolang, N.W.M. Zulkifli, M.J. Ghazali, I.C. Gabeshuber, H.H. Masjuki, Tribology in Malaysia: General perspective, in TTA E-Magazine, Issue 3, 2016, pp. 6-10. [Link]

Developed & Maintained by Mohd Fadzli | All Rights Reserved 2017  | Back to Top |